Owners manual

STEP 2 Install the passenger rail to the spiral.
Passenger rail has “inspected by” sticker under the front of the rail.
Rear attachment hole
Front attachment hole
Bearings enter
channel of rail
here.
Start sliding the cover and bearings
into the channel of the rail.
View from driver side View from passenger side
Slide the rail over the
cover until the two
threaded holes in the
rail are lined up behind
the two holes in the
spiral. Attach using two
of the 10/32 by 7/16"
screws. Tighten using
a manual #2 Phillips
screwdriver.
DO NOT USE LOCTITE!
USE OF LOCTITE VOIDS WARRANTY
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Lift up the lock cover and open lock by pressing release button.