Owners manual

USE
Opening and Using the Cover
Using your RetraxPRO cover is as simple as opening the
lock cover and pressing the button at the center of the
latch to pop open the handle (1). If properly installed, the
cover should be able to roll open and closed easily with
one hand (2). During the break-in period more effort may
be needed, but you still should be able to roll the cover
open and closed with one hand.
Closing and Locking the Cover
To latch your RetraxPRO cover
anywhere along the rail, push down
firmly on the end of the lock handle using
both thumbs (3). It takes this amount of
force because it is a friction lock in any
open position. The RetraxPRO cover is
easier to latch in the fully closed position
due to a recess in the rail.
MAINTENANCE & CARE
Cleaning and Caring for Your Cover
Treat your RetraxPRO cover like you would treat the hood of your truck; you can
wash and wax your cover like you would your pickup. The weatherstripping on your
cover may absorb soapy residue from a car wash, so we recommend wiping down
the inside of your rails from time to time (5).
Important:
NEVER spray any lubricant or cleaner in the rails. This will void your warranty. The
ball bearings are sealed and will not need any sort of lubricant or spray.
Securing Loose Cargo
RetraxPRO covers make transporting
loose and large pieces of cargo safe and
secure; a unique feature that most
tonneau covers cannot claim.
To secure any item too big to fit under the
cover, latch the lock handle shut against
the item to help keep it in place (4).
1
2
4
3
Locked
Position
Unlocked
Position
The teeth of the RETRAX ™
keys always face out
5
The Retrax cover has superior quality, rail weather-strip seals. These seals help minimize water intrusion into the pickup
bed. The initial break-in period for the rail weather-strip is about 48 hours in the fully closed position. Your cover may be
slightly harder to open and close during the break-in period.
RetraxPRO MAINTENANCE AND USE INSTRUCTIONS