Installation Manual
STEP 5b: Install the front and rear Adjustable-back Rack System rail clamps
5a.
NOTE: Due to variations in vehicle designs, the clamps may fit differently on your truck than on
our test vehicles. Retrax is not responsible for cover-to-vehicle installations, nor is Retrax
liable for an damages resulting from attachment, installation, or use.
5b.
5c.
5d.
Always make sure the two
sets of teeth are fully engaged.
Do Not over torque the bolt.
jam nuts
NOTE: if the clamps need to be removed
after the stand-off bolts are set,
the jam nut and bolt will have to be loosened.
6