Technical data

Appendix

Factory pre-set

In the following table, you can see the factory pre-set parameters or values for your Retell 340. You can change all these parame-

ters individually. You can easily reset the telephone to the factory pre-set parameters via the “service menu”.

Language English

Automatic switch for daylight saving time (summer/winter) Yes

Voice time stamp Yes

Voice date stamp Yes

Announcement (of date and time) at the device No

Recording quality 3

Recording length 2 minutes

Call screening during IGM recording Yes

Number of ringing tone before call pick-up 2

Own telephone number -

Remote control code -

Remote pre-interrogation No

Remote activation of the answering mode No

Remote erase Yes

Room monitoring Yes

Message code -

VIP code -

Redialling interval 10 seconds

Call-back (external) -

Exchange identification code (telephone systems) -

Internal call-back code (telephone systems) -

Dialling method Tone dialling

Special information tone Off

Display light Automatically

Outgoing messages (OGMs) 6 (pre-recorded)

Time control Off

Message transfer Off

Message collection 1

Reminder period 20 minutes.

Number of reminders 2

OGMs for message transfer 5

Destination number for message transfer -

Activation code for message transfer -

Deactivation code for call forwarding -

Destination number for call forwarding -

Individual ringing tone Off

Automatic two-way conversation recording No

All calls No

Confirm saving process Yes

PIN 0000