Technical data

Automatic two-way conversation recording

If you activate the function “automatic two-way conversation recording”, the recording of a telephone call starts as soon as you

pick-up the handset. The recording stops as soon as you replace the handset or if the maximum recording capacity of 12 minutes

was achieved. It is up to you whether you want to record all telephone calls or just incoming calls (threatening or malicious calls).

To save recording capacity for important recordings, you will have the option to confirm the storage process at the end of a two-

way conversation recording.

Programmable parameters for the automatic two-way conversation recording

Function active ..................... Yes or no. Here, you can activate or deactivate the function.

All calls ................................. Yes or no. If you set “No”, only incoming calls will be recorded.

Confirm storage ................... Yes or no. If you set “Yes”, you will have the option to confirm that you want to store a recording. If

a confirmation is not given in such case, the recording will be erased automatically.

Settings for the automatic two-way conversation recording

Press the menu button. The display shows the main menu.

Use the arrow buttons (up/down) to select the menu item

“autom. 2-way conversation recording”.

Press the select button next to the menu item “autom. 2-

way conversation recording”.

The display shows the entry field for “autom. 2-way conversation

recording”.

Press the select button next to the setting to be changed

until the desired menu option is displayed.

The display shows the current setting.

Press the stop button several times to complete the entry. The display shows the initial state.