Technical data

Message transfer
25
2s
To erase the entire destination number, press the select
button next to the “delete” symbol and keep it pressed for
2 seconds.
The entire destination number is erased.
If you want to perform other settings, press stop. The current settings are stored.
Press stop several times to complete the entry. The display resumes the initial state.
Example on how to enter the destination number
In the case of telephone systems, the exchange identification code is automatically dialled before each telephone number (see
also “Settings, Telephone systems/
access identification code”). In order to avoid that this is done also for internal extension numbers, you need to dial “i” before any
internal destination number.
As for paging services (e. g. Cityruf), you need to enter “
” after the telephone number (wait for end of announcement). Here, you
have the possibility to enter numeric information after the sign for “wait for end of announcement”.
Normal subscriber 0123456789
Telephone systems
From extension to extension i 269
Paging services
Cityruf “tone only” 0164 567890
Cityruf “numeric” 0168 56789012345##
Scall 01681 123456712345#