Technical data

Outgoing messages
12
Recording OGMs from an external signal source
Professional OGMs can also be recorded from external signal sources (e. g. tape deck) - via the audio input.
Select the desired OGM by pressing the select button next
to the OGM symbol.
The selected OGM is displayed next to the symbol at the bottom
right side.
Press the button for the secondary function. The display shows the symbol for the secondary function.

Press OGM and keep pressed. Wait, you hear a brief tone, the display shows a cassette symbol
that indicates the readiness to record via the audio input.
Start the playback function at the external signal source. The display shows the duration of the current recording in min-
utes and seconds.

To stop the recording, release the OGM button. The display shows “with incoming recording” and “without incom-
ing recording”.
Use the select button next to the corresponding line, to de-
termine whether the OGM shall be available with or with-
out an option for an incoming recording.
The recording is complete and it will be played back for test pur-
poses. An OGM without incoming recording is indicated by just 1
signal tone. An OGM with incoming recording option is indicated
by 2 signal tones.

For high quality recordings (e. g. outgoing messages with background music), we recommend to set the highest recording
quality temporarily (see “settings”).