Operating instructions

Service menu

The service menu offers you an information on the currently installed program ver-

sion, to restore the factory pre-set, to delete the electronic directory or to load the lat-

est program version via the telephone network. In addition to that, you have the pos-

sibility to copy the telephone directory from one tiptel 345 pro to another via the

audio interface. To do so, set one of the devices to “Receive telephone directory

data” and set the other tiptel 345 pro to “Send electronic telephone directory data”.

The function “factory pre-set” allows you to resume the basic settings. The call list

and all recordings (also OGMs and individual ringing tones) are deleted. The tele-

phone directory entries are retained. You can delete the entire telephone directory

with the function “delete telephone directory”. The function “Software download”

serves to load the latest program version via the telephone network. The former pro-

gram is replaced by the latest version.



Attention:

After having carried out a software update, it may occur, that all set-

tings are lost!

A download process can take up to 15 minutes and it will be charged according to

your local provider's telecommunication charges. You should only run the download

in the event of technical problems – and after having contacted our technical support.

If your tiptel 345 pro does not offer the item “Resume“ in the “Greeting and call

transfer” menu, please start a software download via the service menu to get the

latest firmware version. The item “Resume” will then be available in the service

menu.

Press the menu button. The display shows the main menu.

Use the arrow buttons (up/down) to

search for the menu item “service

menu”.