Operating instructions

Examples of applications for the tiptel 345 pro
88
Press the select button next to
“resume”.
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards/downwards).
Here, enter the telephone system proce-
dure on how to resume a transferred call.
Normally, this is also the FLASH function
“F”. But, there are also PABXs where e.
g. “F0” or “FF” need to be set. You
should also refer to the operating in-
structions of your telephone system to
identify the required settings.
As for settings with more than one
digit, use the control buttons (right/
left) to move the cursor.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.
Use the control buttons (upwards/
downwards) to look for the option
“target number”.
Press the select button next to
“target number”.
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards/downwards).
Here, enter a telephone number to which
the caller shall be connected to directly,
e. g. collective call number.
As for settings with more than one
digit, use the control buttons (right/
left) to move the cursor.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.
Use the control buttons (upwards/
downwards) to look for the option
“busy extension message”.
Press the select button next to
“busy extension message”.
The input position flashes.