Operating instructions

Examples of applications for the tiptel 345 pro
79
Press the select button next to
“resume” .
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards / downwards).
Here, enter the telephone system proce-
dure on how to resume a transferred call.
Normally, this is also the FLASH function
“F”. But, there are also PABXs where e.
g. “F0” or “FF” need to be set. You
should also refer to the operating in-
structions of your telephone system to
identify the required settings.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.
Use the control buttons (upwards/
downwards) to look for the option
“target number”
Press the select button next to
“target number”.
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards/downwards).
Here, enter the extension number to
which an incoming call shall be con-
nected to automatically if the caller does
not make any choice by dialling a spe-
cific number at the end.
As for settings with more than one
digit, use the control buttons (right/
left) to move the cursor.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.
Use the control buttons (upwards/
downwards) to look for the option
“automatic attendant >>”.
Press the select button next to
“automatic attendant >>”.
You will see a list of target extension
numbers.
Press the select button next to
“target number 1”.
The input position flashes.