Operating instructions

Examples of applications for the tiptel 345 pro
78
Use the select button next to the
relevant text to determine whether
the OGM shall be available with or
without an option for an incoming
message recording.
(As this is a greeting and call trans-
fer announcement, an incoming
message recording is not neces-
sary, here.)
The recording is complete and it will be
played back for test purposes. An OGM
without incoming recording option is in-
dicated by 2 signal tones at the end.
Menu item “greeting and call transfer”
Press the menu button. The display shows the main menu.
Use the control buttons (upwards/
downwards) to look for the option
“greeting and call transfer”.
Press the select button next to
“greetings and call transfer”.
The display shows the input field for the
greeting and call transfer.
Press the select button next to
“greeting message”.
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards/downwards).
Set the number of the announcement that
you have recorded as your greeting mes-
sage. In our example, this was “1”.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.
Press the select button next to
“hold”.
The input position flashes.
You can take out desired changes
or adjustments using the control
buttons (upwards / downwards).
Please enter the hold function used in
your telephone system. “F” (Flash=
90ms) is the factory pre-set. You should
also refer to the operating instructions of
your telephone system to identify the re-
quired settings.
To finish input, press the select
button next to the relevant text
again.
The input position stops flashing.