Operating instructions

Mailboxes

Press the select button next to the

menu item to be changed until the

desired setting is shown in the dis-

play.

The display shows the current setting.

To enter numbers, press the select

button next to the corresponding

line.

The cursor flashes.

Press the arrow buttons to change

the setting parameter (up/down).

The cursor goes up or down.

For parameters with more than one

digit, you can move the cursor by

pressing the arrow buttons

(right/left).

The current cursor position flashes.

To complete the entry of numbers

or characters, press the select but-

ton next to the corresponding line

again.

The cursor position stops blinking.

To complete the entry, press the

stop button several times.

The display goes back to the initial state.



If you use mailboxes, the VIP, message and remote control codes should not

begin with the numbers 1 to 8. This is to prevent that your tiptel 345 pro will

switch to the corresponding mailbox when the code number entered first is

identified to be 1 – 8. Should you use the numbers 1 – 8 as the first figures of the

code, you have to press the * button before entering the code. This serves to

differentiate between code and mailbox entries.