Operating instructions

Message transfer
36
Example on how to enter the target number
In the case of PABXs, the identification code is automatically dialled before each
telephone number (see also “Settings, PABXs/access identification code”). In order
to avoid this also for internal extension numbers, you need to dial “i” in front of those.
As for paging services (e. g. Cityruf), you need to enter “

” after the telephone num-
ber (wait for end of announcement). Here, you have the possibility to enter a numeric
information after the sign for “wait for end of announcement”.
Normal subscriber 0123456789
PABXs
From extension to extension i 269
Paging services
Cityruf “tone only” 0164 567890

Cityruf “numeric” 0168 567890

12345##
Scall 01681 1234567

12345#
Activating the message transfer
Press the message transfer button. The display shows the symbol for mes-
sage transfer.
To de-activate the message trans-
fer, press the message transfer
button again.
The symbol for message transfer is no
longer displayed.

During a running message transfer process, the message transfer symbol
flashes.