Operating instructions

Message transfer
35
Use the arrow button (right) to
move the cursor to the next entry
point and enter further numbers.
The cursor jumps to the next entry point.
If you need to move the cursor to
the left, e. g. to overwrite a number,
you can do that by pressing the
arrow button (left).
The cursor moves to the left side.
In order to use a telephone number
from the telephone cirectory, press
the select button next to the “insert”
symbol.
The telephone number is inserted at the left
side of the cursor.

Search for the name as described
under “Searching for entries” and
select the desired entry.
To insert a character, press the
button for the secondary function
and the arrow button (down) con-
secutively.
A blank is inserted at the left side of the
cursor.
To delete a character, move the
cursor to the position in question
and press the select button next to
the “delete” symbol.
The character at the current cursor position
is deleted.
2s
To delete the entire target number,
press the select button next to the
“delete” symbol and keep it pressed
for 2 seconds.
The entire destination number is erased.
If you want to use other settings,
press stop.
The current settings are stored.
Press stop several times to com-
plete the entry.
The display goes back to the initial state.