Operating instructions

Message transfer
34
Message transfer settings
Press the menu button. The display shows the main menu.
Press the select button next to the
item “message transfer”.
The message transfer menu is shown in
the display.
Use the arrow buttons (up/down) to
view the available options.
The display shows all available options.
Press the select button next to the
line with the desired entry. You can
use the arrow buttons (up/down) to
change parameters.
The display shows the current parameter.
or
To enter the target number, press
the select button next to “target
number” and set the first number
using the arrow buttons (up/down).
The cursor flashes.
The display shows the numbers and spe-
cial characters. The special characters
stand for:
~ = Wait for dialling tone / 3 sec. pause
i = Intern (for PABXs)
F = Flash (for PABXs)
 = Wait for the end of the announce-
ment