Operating instructions

Message transfer

For the message transfer, the answering machine always dials a stored target num-

ber after having recorded 1 to 5 incoming messages (see message collection). When

the subscriber answers the call, the following announcement is heard:

“Automatic call, x messages, please perform a remote interrogation. I repeat ...” or if

you programmed your own telephone number as an identification number “Auto-

matic call from ... (own telephone number), x messages, please perform a remote

interrogation. I repeat ...”.

During the announcement you have the option to start the remote interrogation. For

pager numbers, (e.g. Cityruf, Scall) this automatic announcement will not be played.

If the target telephone number is busy, the device will redial up to three times every 3

minutes. If the called party does not perform a remote interrogation within the pro-

grammed waiting time (5 to 60 minutes), the answering machine will dial the pro-

grammed destination number again as a reminder. If no remote interrogation is per-

formed, your tiptel 345 pro will repeat the reminder process once, twice or not at all

(depending on the programmed default value).

Programmable parameters for the message transfer

Message collection ............... Here, you can determine how many messages shall

be collected before initiating the message transfer

process, i. e. either after receiving 1, 2, 3, 4 or even 5

incoming messages.

Reminder period ................... 5 minutes up to 60 minutes.

Number of reminders ........... 1, 2 or none

Number of announcements

during message transfer....... 1 to 8 times. You can set the number of repetitions for

the announcement during message transfer.

Target number ....................... >>

Target number ........... Here, you enter the target telephone number for the

message transfer. The target number may have a

length of 40 digits as a maximum – including a nu-

meric information for paging services.