Operating instructions

Time control

The time control allows you to program up to 10 individual switching times at which

you have the option to switch the answering mode on or off, exchange the outgoing

messages, switch the call transfer or the message transfer on or off.

How to use the time control function in connection with the voice mail system an/or

the greeting and call transfer function, you can read in chapter “Application exam-

ples”.

Programmable parameters for the time control

Switching time ....................... You can set the time at which the function is to be

changed over. “- - -” indicates that no switching time

has been programmed.

Weekday ................................ Here, you can set the weekday when the function is

to be changed over. “- - -” indicates that no change

will be effected on that day.

Answering mode ................... On, off or “–”. The entry “–” indicates that there will

be no change (the earlier status is remains un-

changed).

Outgoing message ................ 1 to 9 or “–”. The entry “–” indicates that the earlier

OGM is still active.

Message transfer .................. On, off or “–”. “–” indicates that there will be no

change (the earlier status is remains unchanged).

Call transfer ........................... On, off or “–”. The entry “–” indicates that there will

be no change (the earlier status is remains un-

changed).