Operating instructions

Answering mode



Make sure that you provide enough recording capacity for incoming messages.

If required, you may delete individual recorded messages or all incoming mes-

sages (see chapter “telephone mode with greeting and call transfer”)..

Select the desired OGM by pressing

the select button next to the OGM

symbol.

The selected OGM is displayed next to

the symbol at the bottom right side.

Press the button for the answering

mode.

The answering mode button is lit. If you

selected an OGM “without incoming re-

cording”, a handset symbol and the

number of incoming calls will be dis-

played. As for a selected OGM “with in-

coming recording”, you will also see the

number of recorded incoming messages

on the right side of the displayed handset

symbol. The number of calls shown in

the display flashes when the answering

module picks up an incoming call.

If the caller's telephone number is being

displayed during a call, the display will

show this telephone number instead. If

the telephone number in question

matches with one of the telephone num-

bers of the telephone directory, also the

corresponding name will also be dis-

played.

Use the arrow buttons to adjust the

volume (left/right).

Call screening is possible for incoming

messages. If you decide to answer the

call personally, you can do so at any

time, by just picking up the handset. If

new incoming messages exist, the an-

swering button will flash.