Operating instructions

Outgoing messages



If you record OGM 5 as outgoing message without incoming recording

(announcement only), your tiptel 345 pro will automatically switch to this OGM

as soon as the recording capacity for the current OGM with incoming recording

should be exhausted.

Recording OGMs from an external signal source

Professional OGMs can also be recorded from external signal sources (e. g. tape

deck) - via the audio input.

Select the desired OGM by pressing

the select button next to the OGM

symbol.

The selected OGM is displayed next to

the symbol on the bottom right side.

Press the button for the secondary

function.

The display shows the symbol for the

secondary function.



Keep OGM pressed. Wait until you hear a brief tone, the dis-

play shows a cassette symbol which in-

dicates the readiness to record via the

audio input.

Start the playback function at the

external signal source.

The display shows the duration of the

current recording in minutes and sec-

onds.



To stop the recording, release the

OGM button.

The display shows “with incoming re-

cording” and “without incoming record-

ing”.

Use the select button next to the

corresponding line, to determine

whether the OGM shall be available

with or without an option for an in-

coming recording.

The recording is complete and it will be

played back for test purposes. An OGM

without incoming recording is indicated

by just 1 signal tone. An OGM with in-

coming recording option is indicated by

2 signal tones.