Operating instructions

Settings

For settings with more than one

digit or character, you can move the

cursor by pressing the arrow but-

tons (left/right).

The selected cursor position blinks.

To complete the entry of numbers,

press the select button next to the

corresponding line again.

The selected cursor position stops

blinking.

To complete the entry, press the

stop button several times.

The display goes back to initial state.

Contrast adjustment

You can adjust the display contrast when the device is in the stand by mode.

Adjust the contrast by pressing the

arrow buttons (left/right).

The display contrast is being changed.

Brightness adjustment

The brightness of the display light can be adjusted when the device is in the stand by

mode.

Press the button for the secondary

function.

The display shows the symbol for the

secondary function.

Adjust the brightness by pressing

the arrow buttons (left/right).

The brightness of the display light is be-

ing changed.

Press the stop button to complete

the entry.

The symbol indicating the secondary

function is no longer displayed.