User's Manual

iBreeze CPAP System User Manual
21
Note：
1. Do not remove the SD card from the device during therapy.
2. Do not use the SD card for any other purpose.
3. This device can use only manufacturer SD card. Please contact your supplier for
purchasing.
9.2.7 Wireless transmission module
9.2.7.1 Wifi module connection
There are 2 methods for the device to match WiFi network，connect to the network
through APP or connect to the network through the device.
Method 1：Connect to the network through APP
❶
Power on and start up the device，enter the setting interface—Wifi—set to On.
❷
Download “ResAssist” APP，IOS system downloads from the“App store”，Android
system downloads from the “Google Play”.Register for an account after downloading is
finished. Step 1，use the mobile phone number or email to register a new account
number；Step 2，use the serial number of the device to register the user information,
complete the two steps and then registered successfully.
❸
Log in “ResAssist” APP with the registered account，turn on the Bluetooth of your
phone，click the “My” icon in the lower right corner—“WIFI settings”，enter Wifi setting
interface.
❹
Follow the steps on the APP interface，match Wifi network to the device，until Wifi
connected successfully.
❺Sign of Wifi connected successfully：ResAssist APP shows“Connection successful”
or there is a icon on the standby interface to reminder the connection is successful，the
icon is .
Method 2：Connect to the network through the device
❶Power on and start up the device，enter the setting interface—Wifi—set to On.
❷WiFi interface on the device，click “search”—search for the WiFi signals
nearby—enter the WiFi list interface.
❸Click on an available Wifi—enter the Wifi password input interface，enter the correct
password -- until Wifi connected successfully.
❹
Sign of connection successful
：
Wifi status is connected
，
Wifi status icon
is .
9.2.7.2 Usage of Wifi module
❶The method for the device to connect WiFi network is through APP or through the
device.
❷Press the Therapy On/Off key on top of the device to turn on airflow and begin
therapy.
❸The device ventilation effectively（Put on the mask and breathe normally）for a period
of time and then stop it，Wifi connect normally and begin to upload data，Wifi icon signs
an up arrow in the lower right corner.
❹After data upload，log in the Cloud，view the treatment data uploaded from the cloud.