User's Manual

iBreeze CPAP System User Manual

7 System Overview

# Device Feature Description

1 Therapy On/Off

Button

Starts and stops the airflow for therapy.

2 Ramp Key Activate the ramp feature during therapy.

3 LCD Display screen This is the User interface for the therapy device.

4 Control Dial Turn the dial to scroll between options on the screen.

Press the dial to choose the option.

5 Water Tank Lock Press the water tank lock to remove the water tank.

6 Water Tank This one piece removable water tank holds the water

for humidification.

7 Air Outlet Port Connect the tubing here.

8 Power Inlet Connect the power cord here.

9 SD card Access Door This door lifts open for access to SD card.

10 Air Inlet Port Inlet for room air.

11 Filter Cotton Cover Open the filter cotton cover to place or change the

filter cotton.

7.1 Placing the Device

Place the device on a firm, flat surface somewhere within easy reach of where you will

use it at a level lower than your sleeping position. Make sure the device is away from

any heating or cooling equipment (e.g., forced air vents, radiators, air conditioners).

Note: When positioning the device, make sure that the power cable is accessible

because removing power is the only way to turn off the device.

CAUTION:

 Make sure the filter area on the side of the device is not blocked by bedding,

curtains, or other items. Air must flow freely around the device for the system to

work properly.

 Do not place the device directly onto carpet, fabric, or other flammable materials.