Instructions / Assembly

Platform Bed Instructions
Step 1. Take all components out of the box
and lay them out on the oor.
Step 2. Unfold each half and lay at. Raise all six legs to
upright position. Each of the four end legs have
separate support arms. Rotate support arms to hook
on to the bolts and tighten with installed wing nuts.
Note: The two center legs do not require wing nuts.
Step 3. Tighten the wing nut until secure. Repeat the same
process for all four end legs, making sure all wing
nuts are tightly secured.
Step 4. Flip the base over to stand upright. Follow the same
steps to assemble the other base unit.
Step 5. Insert two halves together with keyhole locked in place.
Note. For twin size there is only one piece.
Enjoy your new bed frame!
Watch a video with
these instructions:
A