Instructions / Assembly

Platform Bed

Assembly Instructions

Contains One Bed and Hardware

STEP 4

STEP 5

ASSEMBLY INSTRUCTIONS (CONTINUED)

A A

Insert the Center Rail (Part F) into the brackets on the

Headboard and Footboard. Using a screwdriver, secure the

center rail using two 16mm Screws (Part O).

Roll out the Wood Slat System (Part G) and secure it in place

using nine 32mm Screws (Part P). Use the pre-drilled holes

and a screwdriver. Your Platform Bed is now set up.

PAGE 1
ASSEMBLY INSTRUCTIONS (CONTINUED) STEP 4 Platform Bed Assembly Instructions F Contains One Bed and Hardware F O Insert the Center Rail (Part F) into the brackets on the Headboard and Footboard. Using a screwdriver, secure the center rail using two 16mm Screws (Part O). STEP 5 G P Roll out the Wood Slat System (Part G) and secure it in place using nine 32mm Screws (Part P). Use the pre-drilled holes and a screwdriver. Your Platform Bed is now set up.
PAGE 2
IMPORTANT NOTE: ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. Phillips Screwdriver STEP 1 PARTS LIST M A A. Headboard Top (1 pc) B. Footboard (1 pc) J D2 I C. Side Rail (2 pcs) M D1 J K L I D1 D. Headboard Leg (2 pcs) E. Footboard Leg (2 pcs) F.