Specifications

8
SYSTEM FEATURES
AC Power Connector.......... Connect the AC power cord here.
AC Voltage Selector ............ This switch is used to select the AC voltage
(115V or 230V)
Air Outlet ............................ Connect flexible tubing here.
DC Power Connector.......... Connect the optional DC power cord here.
Filters ................................... The pollen filter screens out normal
household dust and pollens. This must be in
place at all times when the Solo is operating.
An optional, ultra-fine filter is also included
for more complete filtration of very fine
particles.
Fuse Compartment ............. This holds the AC fuses. Fuses must be
changed if you change the voltage setting for
travel (115 V / 230 V).
Pressure On / Off
Button ................................ This button turns the air flow on or off.
Power Cord ......................... Type H05VV-F.
Ramp Button ....................... This button decreases the pressure to the
minimum pressure setting. When pressed,
the pressure delivered will drop to 4 cm H
2
O
and then gradually increase to the prescribed
pressure over a 20-minute time period.
Signal Light ......................... The green light signals when the Solo is
powered.
Time Meter .......................... (Solo Plus only) Displays the total operation
time, including up to 200 hours of factory
testing time. Provides resolution to 1/10
hour. Operates only when the airflow is
turned on.
Medical Product Note: For ease at airport security stations, there is a
note on the bottom of the Solo stating that it is
medical equipment. It may help if you also take
this manual with you when you travel.