Specifications

SUMMARY

This summary is not intended to replace the complete user instructions. The

entire manual should be read and understood before operating the Solo System.

Step 1 Check that the correct voltage setting has

been selected (e.g., N. America - 115 V,

Europe - 230 V). Change the voltage

setting and fuses, if necessary.

AC Voltage

Selector

Step 2 Plug the power cord into the

AC power cord connector

and an electrical outlet.

Step 3 Press the ramp button to verify that

the correct elevation setting has been

selected (i.e. one flash = low elevation;

three flashes = high elevation).

Ramp

Button