Specifications

FEATURES
3
Power Cord: Use the power cord included with your CPAP device.
Power Jumper Cord: Plug this cord into the AC inlet on the Respironics
CPAP device.
Heater Plate: Warms the water in the water chamber.
Indicator Light: When lit, this indicates that the heater plate has been
turned on.
Air Inlet with
Rubber Connector: Connect to the outlet port on the CPAP device.
Outlet Port: Connect the flexible tubing here.
Water Chamber: The removable water chamber holds the water for
humidification. It has a removable base plate for
ease in cleaning.
Fill Line: This indicates the maximum water level for safe
operation.
Sensor: Do not block this sensor. The humidifier will not
operate unless it can detect that the CPAP device is
positioned correctly.
Replacement
Rubber Connector: This can be used if the rubber connector becomes
damaged.
Water Chamber with
Removable Base Plate
Air Inlet with
Rubber Connector
Replacement
Rubber Connector
Fill
Line
Outlet
Port
Heater
Plate
Indicator
Light
Power
Jumper Cord
(connects to
CPAP device)
Connect the
AC Power Cord
here
Sensor