Specifications

7
SYSTEM FEATURES
AC Power Connector.......... Connect the AC power cord here.
AC Voltage Selector ............This switch is used to select the AC voltage
(115V or 230V)
Air Outlet ............................ Connect flexible tubing here.
DC Power Connector.......... Connect the optional DC power cord here.
Filter Cap & Filters ............ The pollen filter screens out normal
household dust and pollens. This must be in
place at all times when the REMstar LX is
operating. An optional, ultra-fine filter is
also included for more complete filtration of
very fine particles. (filters not shown)
Fuse Compartment ............. This holds the AC fuses. Fuses must be
changed if you change the voltage setting for
travel (115 V / 230 V).
Pressure On / Off
Button ................................ This button turns the air flow on or off.
Power Cord ......................... Type H05VV-F. (not shown)
Pressure & Elevation
Display ............................... Displays the pressure and elevation settings.
Ramp Button ....................... This button decreases the pressure to the
minimum pressure setting. When pressed,
the pressure delivered will drop to 4 cm H
2
O
and then gradually increase to the prescribed
pressure over the prescribed time period.
Signal Light ......................... The green light signals when the REMstar
LX is powered, with the blower turned off.
Time Meter .......................... (REMstar Plus LX only) Displays the total
operation time, including up to 200 hours of
factory testing time. Provides resolution to
1/10 hour. Operates only when the airflow is
turned on.
Medical Product Note: For ease at airport security stations, there is a
note on the bottom of the REMstar LX stating
that it is medical equipment. It may help if you
also take this manual with you when you travel.