Specifications

SUMMARY

This summary is not intended to replace the complete user instructions. The entire manual

should be read and understood before operating the REMstar LX System.

Step 1 Check that the correct voltage setting has been

selected (e.g., N. America - 115 V, Europe - 230 V).

Change the voltage setting and fuses, if necessary.

Step 2 Plug the power cord into the

AC power cord connector

and an electrical outlet.

Step 3 Press the ramp button to verify that

the correct elevation setting has been selected.

To change the elevation setting, press the ramp button

and hold it down. While holding the ramp button down,

press and release the pressure on/off button. Release the

ramp button.

Ramp

Button

AC Voltage

Selector