Specifications

19
ROUTINE MAINTENANCE
Cleaning and
Replacing
the Filters
CAUTION!
The gray pollen filter should be cleaned at least once every two weeks
under normal usage and replaced with a new one every six months.
The white ultra-fine filter is disposable and should be replaced after
30 nights of use or sooner if it appears dirty. DO NOT clean the ultra-
fine filter.
Operating the REMstar LX with a dirty filter may keep the system
from working properly and damage the REMstar LX.
1. Remove the filter cap by gently pressing down on the two latches
on the top of the filter cap.
2. Change the filters.
a. Remove the pollen filter by gently pulling around the edges of
the filter. Rinse the filter in a steady stream of running water.
Squeeze out the water and repeat. Air dry on a rack for 8 to 12
hours or in a clothes dryer for 15 to 20 minutes.
If you are using the white ultra-fine filter, and it appears dirty,
discard the filter and replace it with a new one.
b. Place the white ultra-fine filter under the clean pollen filter.
Insert the filter(s) into the filter area on the back of the
REMstar LX.
Never install a wet filter into the REMstar LX. We recommend
that you clean the filter in the morning and alternate using the two
pollen filters provided with the System to ensure enough drying
time for the cleaned filter.
3. Replace the filter cap.
CAUTION!