Specifications

16
ROUTINE USE
Pressing the Ramp button will reduce
the air pressure when you are trying
to fall asleep. The air pressure will
gradually increase until your pre-
scription pressure is reached. You
also have the option of not using the
ramp feature at all.
3. Press the Ramp button on the top
of the REMstar LX. You can use
the Ramp button as often as you
wish during the night. (NOTE: After
the first activation, each subsequent ramp
will be for one-half of the set ramp time.)
Using the
Ramp Button
CAUTION!
Turning the
System OFF
Helpful Hints
When using a humidifier, you must disconnect the humidifier tubing
from the REMstar LX System when the air flow is turned off. Moisture
can build up in the System and cause damage to it.
4. Press the Pressure On/Off
button on the top of the
REMstar LX to turn the air
flow OFF.
• If you want to talk after putting on the mask, use the Ramp
button to reduce the pressure. This will make talking easier.
• Make sure that bedding, curtains, or other items are not blocking
the filter or vents of the REMstar LX. Air must flow freely around
the REMstar LX for the System to work properly.
• If the air flow from the REMstar LX feels cold, reposition the
circuit tubing so that it runs under your bed covers to reduce heat
loss while you sleep.
Ramp
Button
Pressure
On/Off
Button