Specifications

REMstar Plus User Manual ❍ 9

First Time Setup

1. Install the filter and filter cap.

The pollen filter must be in place at all

times when the device is operating.

a. Place one of the filters into the

filter area on the back of the

device. An extra filter is included

for your convenience.

b. Attach the filter cap. Position the

cap so that the small opening on the

cap is facing down. Insert the cap’s bottom tabs into the openings

below the filter area. Press down on the cap’s top tabs and insert

them into the openings above the filter area.

2. Connect the power cord.

Plug the socket end of the power cord into the

AC inlet on the back of the device. Plug the

pronged end of the power cord into an

electrical outlet.

Inspect the power cord often for any signs of damage. Replace a

damaged cord immediately.

This device is activated when the power cord is connected. The Pressure

On / Off button turns only the blower on/off.

Installing Filters

Power Cord

CAUTION!