User manual

4-9REMSTAR PLUS M SERIES USER MANUAL
Mask Alert
Feature: ON
5. Mask Alert Screen
You can enable or disable the mask alert setting by pressing the +
or – buttons to select OFF or ON. If this feature is enabled, then the
words Mask Leak appear on the Active display screen if a signifi-
cant mask leak is detected, and an audible alert sounds.
Note: If your physician indicates that the Mask Alert is neces-
sary for you, do not disable it.
Auto Off
Feature: ON
6. Auto Off Screen
You can enable this feature if you want the device to automati-
cally turn the airflow off whenever you remove the interface (e.g.,
mask) from your airway.
Press the + or – buttons to select OFF or ON. If this feature is en-
abled, then the words Auto Off appear on the Standby screen if
the device detects that you have removed your mask. The airflow
shuts off, and the Auto Off message continues to appear on the
Standby screen until the condition is corrected.
After you have finished modifying the Patient Setup screens, press the
button to return to the
Standby screen.
Note: The Setup menu automatically times out and returns to the Standby screen
after one minute of inactivity.