User manual

4-5REMSTAR PLUS M SERIES USER MANUAL
4.3 CHANGING THE DEVICE SETTINGS
You can view the set pressure on the Active Display screen, and the following information on the
Patient Data screens:
• erapy usage hours
• Number of sessions greater than 4 hours
Additionally, you can view and modify the following settings on the Patient Setup screens:
• C-Flex (if enabled by your home care provider)
• Altitude
• Ramp starting pressure (if enabled by your home care provider)
• Mask alert (enable/disable)
• Auto off (enable/disable)
4.3.1 NAVIGATING THE DISPLAY SCREENS
Use the button to navigate to the next screen and the button to navigate to the previous
screen.
Use the + and — buttons to adjust the settings on the Patient Setup screens.
4.3.1.1 VIEWING DATA ON THE PATIENT DATA SCREENS
Figure 4–6 shows how to navigate the Patient Data screens.
PressPress
7 Days: 5 Sessions
30 Days: 8 Sessions
– FOSQ
+
Setup
Therapy Usage
7 Day Avg: 5:00
30 Da
y Avg: 8:00
Hrs/Night
Sessions > 4
FIGURE 4–6 NAVIGATING THE PATIENT DATA SCREENS