User manual

3-6 REMSTAR PLUS M SERIES USER MANUAL
FIGURE 3–6 CONNECTING THE POWER SUPPLY CORD TO THE DEVICE
4. Ensure that all connections are secure.
Important! To remove AC power, disconnect the power supply cord from the elec-
trical outlet.
Warning: Inspect the power cord often for any signs of damage. Replace a dam-
aged power cord immediately.
3.4.2 USING DC POWER
e Respironics DC Power Cord (Reorder Number 1001956) can be used to operate this device
in a stationary recreational vehicle, boat, or motor home. e Respironics DC Battery Adapter
Cable (Reorder Number 532209), when used with the DC Power Cord, enables the device to be
operated from a 12 VDC free-standing battery.
Caution: When DC power is obtained from a vehicle battery, the device should not
be used while the vehicle’s engine is running. Damage to the vehicle or the
device may occur.
Caution: Only use a Respironics DC Power Cord and Battery Adapter Cable. Use of
any other system may cause damage to the device or vehicle.
Refer to the instructions supplied with the DC Power Cord and adapter cable for information on
how to operate the device using DC power.