User manual

3-3REMSTAR PLUS M SERIES USER MANUAL
To connect your breathing circuit to the device, complete the following steps:
1. Connect the flexible tubing to the air outlet on the back of the device, as shown in
Figure 3–2. You can use the optional, detachable swivel that is provided with your device and
already attached to the tubing (shown in Figure 3–2), or you can remove the swivel and con-
nect the tubing directly to the air outlet.
Detachable
Swivel
FIGURE 3–2 CONNECTING THE FLEXIBLE TUBING
Note: If required, connect a bacteria filter to the device air outlet, and then connect
the flexible tubing to the outlet of the bacteria filter.
2. Connect the tubing to the mask:
a. If you are using a mask with a built-in exhalation port, connect the mask’s connector to
the flexible tubing, as shown in Figure 3–3.
Flexible
Tubing
Connector
Mask's
Connector
Exhalation Port
FIGURE 3–3 CONNECTING A MASK WITH BUILT-IN EXHALATION PORT