User manual

1-6 REMSTAR PLUS M SERIES USER MANUAL
Figure 1–3 illustrates many of the device features, described in the table below.
Ramp Button
Start/Stop
Button
C-Flex
Button
Power Inlet
Filter Area
Air Outlet
Accessory
Module
Medical
Equipment Note
(on bottom)
Display Screen
(under door)
le
x
FIGURE 1–3 SYSTEM OVERVIEW
DEVICE FEATURE DESCRIPTION
Accessory Module If applicable, insert optional accessory module here.
Air Outlet Connect the flexible tubing here.
C-Flex Button This button allows you to change the C-Flex comfort
setting, if C-Flex is prescribed for you. See Chapter 4
for more information about C-Flex.
Display Screen Shows therapy settings, patient data, instructions,
and error messages.
Filter Area A reusable, gray foam filter must be placed in the
filter area to screen out normal household dust and
pollens. An optional, white ultra-fine filter can also
be used for more complete filtration of very fine
particles.
Medical Equipment Note For ease at airport security stations, there is a note
on the bottom of the device stating that it is medical
equipment. It may help if you also take this manual
with you when you travel.
Power Inlet Connect the power cord here.
Ramp Button This button starts or restarts the ramp cycle.
Start/Stop Button This button starts or stops the airflow.