User manual

 M Series Heated Humidier
sysTeM overvIeW
Figure 1 illustrates many of the device features and contents, described in the table below.
water tank
humidifier base
power supply
air outlet port
AC power cord
power supply cord connector
(connects to CPAP device)
fill line
humidifier power
supply connector
humidifier setting
knob
air inlet port
heater plate
humidifier
door
tank slider
fIgure 1: sysTeM feaTures and ConTenTs
ITeM desCrIpTIon
Humidier Power Supply
Connector
Plug the power supply into this adapter.
Power Supply Use the power supply included with your therapy
device.
Power Supply Cord Connector Plug this cord into the DC inlet on the therapy device.
AC Power Cord Use the cord included with your therapy device.
Humidier Base Connect your therapy device here.
Air Inlet Port Connect to the outlet port on the therapy device.
Air Outlet Port Connect the patient circuit here.
Heater Plate Warms the water in the water tank.
Humidier Door Lift the door to access the water tank.
Water Tank The removable water tank holds the water
for humidication.
Fill Line This indicates the maximum water level for
safe operation.
Tank Slider Use this to lock and unlock the humidier tank halves.
Humidier Setting Knob Use this to reach the desired setting.
NOTE: Read all instructions before using the humidier.
NOTE: This humidier is specied for use with Respironics therapy devices only.