User manual
M Series Heated Humidier
• is equipment is not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide.
• Periodically inspect the humidifier power supply connector, power supply cord
connector, and the AC power cord for signs of wear or damage. Replace the power
supply and AC power cord if worn or damaged. If the humidifier power supply
connector is worn or damaged, contact Respironics or your home care provider.
• When installing the water tank, do not allow any water to spill into the humidifier or
therapy device.
• Pins of connectors identified with the ESD warning symbol ( ) should not be
touched. Connection should not be made to these connectors unless ESD precautionary
procedures are used. Precautionary procedures include methods to prevent build-up of
electrostatic discharge (e.g., air conditioning, humidification, conductive floor cover-
ings, non-synthetic clothing), discharging one’s body to the frame of the equipment
or system or to earth or a large metal object, and bonding oneself by means of a wrist
strap to the equipment or system or to earth.
CauTIons
A caution indicates the possibility of damage to the device.
• If fluids are spilled onto the humidifier base, unplug the power cord from the AC
wall outlet and allow the humidifier platform to drain and dry before using.
• Take precautions to protect furniture from water damage.
• Do not fill above line.
• Remove tank, empty all water, and replace empty tank before transporting the
humidifier base.
NOTE: Additional warnings, cautions, and notes are located throughout this manual.