User manual
0 M Series Heated Humidier
reCoMMended separaTIon dIsTanCes beTWeen porTable and
MobIle rf CoMMunICaTIons equIpMenT and ThIs devICe
e device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. e customer or the user of this device can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and this device as recommended below, according
to the maximum output power of the communications equipment.
raTed MaxIMuM
poWer ouTpuT of
TransMITTer
W
separaTIon dIsTanCe aCCordIng To frequenCy of TransMITTer
M
150 Khz To
80 Mhz
d = 1.2 p
80 Mhz To
800 Mhz
d = 1.2 p
800 Mhz To
2.5 ghz
d = 2.3 p
0.0 0. 0. 0.
0. 0. 0. 0.
. . .
0 . . .
00
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE : At 0 MHz and 00 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propaga-
tion is affected by absorption and reection from structures, objects, and people.