User manual
M Series Heated Humidier
7. Attach the swivel, with the flexible tubing attached, to the humidifier’s air outlet port.
Or, attach the tubing directly to the air outlet port. See Figure 9.
C
-
F
l
e
x
air outlet port
fIgure 9: ConneCTIng The paTIenT CIrCuIT
IMPORTANT! Before each use, examine the exible tubing for any kinks, damage, or
debris. If necessary, clean the tubing to remove the debris. Replace any
damaged tubing.
8. Press the button to turn on the blower.
C-Flex
fIgure 10: TurnIng on The bloWer
NOTE: For information on your M Series therapy device settings, refer to the manual
included with your device.
9. Turn on the humidifier by turning the humidifier knob to the desired setting. e blue LED on
the humidifier knob will turn on and therapy can begin.
CAUTION: The humidier knob must remain on 0 if there is no water in the water
tank or if the water tank is not installed.
IMPORTANT! The blue LED will NOT turn on if you did not start the blower on the therapy
device or if the humidier knob is set to 0.
IMPORTANT! The ideal humidity setting depends on room temperature and humidity.
Initially a setting of 2 is recommended. You can adjust this setting at any
time. Turn the humidier knob to change the setting.
blue LED
fIgure 11: seleCTIng a huMIdIfIer seTTIng