User manual
M Series Heated Humidier
IMPORTANT! Read and understand your therapy device’s manual prior to using this
humidier with your therapy device.
ConneCTIng The Therapy devICe
1. When using a humidifier, the patient circuit attaches to the air outlet port on the humidifier.
If your therapy device has the air outlet port connection attached, you must remove it from your
therapy device before connecting to the humidifier.
To remove the port:
a. Put your thumb underneath the port and insert your index finger into the port opening.
b. Pivoting from the bottom, unsnap the port and pull it away from the device.
C
-
F
l
e
x
air outlet port
fIgure 2: reMovIng The Therapy devICe aIr ouTleT porT ConneCTor
2. Place the therapy device on the humidifier base. Position the therapy device so that the air
inlet port on the humidifier connects to the air outlet port on the device. Use the latch on the
humidifier base as a guide to properly connect the therapy device to the humidifier.
C-Flex
air inlet port
fIgure 3: ConneCTIng The Therapy devICe
seTup