User manual

Complete the following steps to set up
your M Series device and humidier.
Connect the humidier power
supply connector to the device
power supply. Plug the AC power
cord connector into the power
supply, then plug the power cord
into an electrical outlet.
Plug the power supply cord
connector into the device.
Attach the tubing to the optional
swivel and attach the swivel to the
device’s air outlet. Or, attach the
tubing directly to the air outlet.
Lift the humidier door to access
the water tank.
Fill the tank with water until it
reaches the ll line.
Place the water tank back in
the humidier.
Press the button to begin
therapy.
Turn the humidier knob to the
desired setting.
CAUTION
DO NOT TIP OR TRANSPORT THE
DEVICE WITH WATER IN THE
HUMIDIFIER TANK.