User manual

4-9BIpap auto m SerIeS uSer manual
4.0 cmH
2
O
Ramp Start Pres
4. Ramp Starting Pressure Screen
You can increase or decrease the ramp starting pressure in 0.5 cm
H
2
O increments by pressing the + or – buttons. The default setting
is 4 cm H
2
O. You can adjust the setting from 4 cm H
2
O to the
prescription pressure setting.
Note: This screen will not display if your provider has not
enabled Ramp on your device.
Mask Alert
Feature: ON
5. Mask Alert Screen
You can enable or disable the mask alert setting by pressing the
+ or – buttons to select OFF or ON. If this feature is enabled, the
words Mask Leak appear on the Active display screen when a
signicant mask leak is detected, and an audible alert sounds.
Note: If your physician indicates that the Mask Alert is
necessary for you, do not disable it.
Auto Off
Feature: ON
6. Auto O Screen
You can enable this feature if you want the device to automatically
turn the airow o whenever you remove the interface (e.g.,
mask) from your airway.
Press the + or – buttons to select OFF or ON. If this feature is
enabled, the words Auto O appear on the Standby screen if the
device detects that you have removed your mask. The airow
shuts o, and Auto O continues to appear on the Standby
screen until the condition is corrected.
After you have finished modifying the Patient Setup screens, press the button to return to the Standby screen.
Note: The Setup menu automatically times out and returns to the Standby screen
after one minute of inactivity.
4.5 CompletIng the foSQ QueStIonnaIre
Note: The FOSQ option only appears on the Standby screen if you have a SmartCard
inserted or a modem connected to the device.
From the Standby screen, you can access the FOSQ questionnaire by pressing the – button. e
FOSQ test is a ‘quality of life’ questionnaire designed specifically for people with sleep disorders.
e results allow health care professionals to see how therapy has improved the quality of your
life. By completing the questionnaire periodically, you can provide valuable information about
the effectiveness of your treatment. e device can record your answers on the SmartCard or via a
wired or wireless modem for later review by the health care professional. Contact your home care
provider for further instructions.
Note: If your health care professional or home care provider instructs you to complete
the questionnaire, he or she will provide you with the questions, and you
can enter your answers into the device. Make sure a SmartCard or modem is
installed before answering the questions. The FOSQ screens will not display if a
SmartCard or modem is not present and able to store data.