User manual

4-7BIpap auto m SerIeS uSer manual
Apn-Hyp Index
7 Day Avg: AHI = 0.0
30 Day Avg: AHI = 0.0
6. Apnea/Hypopnea Index Screen
This screen displays your Apnea/Hypopnea index (AHI) for the last 7
and 30 days.
Note: This screen only displays if your home care provider has
enabled it. It is only for reference. Your home care provider
may periodically ask you for this information.
Compliance Check
3467
7. Compliance Check Value Screen
This screen displays a number used by your home care provider to
validate that the data provided by you is the data taken from the
Summary Data Screen. This is a “read-only” screen and you cannot
change the number on the screen.
Note: This screen is only for reference. Your home care provider
may periodically ask you for this information.
Summary Data
Therapy Hours: 0:12
Blower Hours: 0:12
Total Sessions: 0
8. Summary Data Screen
This screen displays the total therapy hours for the device, the total
blower hours, and the total number of sessions greater than 4 hours
since the device was last reset by the home care provider. This is a
“read-only” screen and you cannot change the numbers on the
screen.
Note: This screen is only for reference. Your home care provider
may periodically ask you for this information.
4.4.1.2 vIeWIng and modIfyIng patIent Setup SCreenS
Figure 4–8 shows how to navigate the Patient Setup screens.
4.0 cmH
2
O
1 2 3
Press
+
Press
Press
– FOSQ
+
Setup
Bi-Flex Setting
Ramp Start Pres
Mask Alert
Feature: ON
Auto Off
Feature: ON
off 1 2 3
Rise Comfort
Note: Only appears
if Bi-Flex has been
enabled
Note: Only appears
if Bi-Flex has been
disabled
fIgure 4–8 navIgatIng the patIent Setup SCreenS