User manual

4-5BIpap auto m SerIeS uSer manual
4.4.1 navIgatIng the dISplay SCreenS
Use the button to navigate to the next screen and the button to navigate to the previous
screen. Use the + and — buttons to adjust the settings on the Patient Setup screens.
4.4.1.1 vIeWIng data on the patIent data SCreenS
Figure 4–7 shows how to navigate the Patient Data screens.
Press Press
7 Day Avg: 10.0/5.0
30 Day Avg: 12.0/5.0
90% Pressure
Note: Only appears
if in Auto Bi-level
therapy.
7 Days: 5 Sessions
30 Days: 8 Sessions
– FOSQ
+
Setup
Therapy Usage
7 Day Avg: 5:00
30 Day Avg: 8:00
Hrs/Night
Sessions > 4
7 Day Avg: 0.0
30 Day Avg: 0.0
System Leak
L/min
Apn-Hyp Index
7 Day Avg: AHI = 0.0
30 Day Avg: AHI = 0.0
cmH
2
O
Compliance Check
Summary Data
3467
Therapy Hours: 0:12
Blower Hours: 0:12
Total Sessions: 0
fIgure 4–7 navIgatIng the patIent data SCreenS
Press the button to scroll forward through the data screens, or press the button to scroll
through the screens in the reverse order.
e Patient Data screens are described below.
– FOSQ
+
Setup
1. Standby Screen
The Standby screen appears when you rst apply power to the
device. You can access the Patient Data menu from this screen by
pressing the or buttons.
Note: You can access the Patient Setup screens by pressing the
+ button, and the FOSQ questionnaire by pressing the
— button, as described later in this chapter.
Note: The FOSQ option only appears if a SmartCard is inserted or
a modem is connected to the device.