Specifications

22
EverGo User Manual
Visual, Audio
Indicators
Description What To Do
1 short beep
Flow Control Setting
The large number in the center
of the screen shows the oxygen
ow setting� (In this example, it
is shown as 2�) This number can
range from 1 to 6 in increments
of one-half: 1, 1½, 2, 2½, etc�
If this is your ow
setting, no action
is needed�
If this is not your
proper ow
setting, touch the
number to activate
the arrows (shown
below)�
(Symbol
ashes)
Warm Up Indicator
When the Flow Control Setting
number (shown here as 2) is
blinking or ashing, it means
the EverGo device is warming
up� It will stop ashing when it
is producing oxygen at normal
purity levels, approximately 10
minutes after startup�
Breathe from
the EverGo
device normally�
Breathing from
the device causes
it to reach purity
levels faster than
10 minutes�
1 short beep
Flow Control Change Arrows
These arrow symbols appear
after you touch the ow control
setting number� They allow
you to change the ow control
setting�
Touch the top
arrow to increase
the ow control
setting�
Touch the bottom
arrow to decrease
the ow control
setting�