Specifications

19
EverGo User Manual
Visual, Audio
Indicators
Description What To Do
3 short beeps
+
3 long beeps
Technical Fault Alarm
This alarm occurs when:
a) the battery runs out or
b) the device has a general
malfunction and the unit is no
longer operating properly�
The device may or may not shut
down depending on the severity
of the alarm�
Recharge the
batteries and
try to restart the
device�
If this alarm occurs
again, change to
another source
of oxygen and
contact your home
care provider�
Alarm Silenced Symbol
This symbol appears when you
press the bell symbol to silence
the audible alarm (beeps)�
No further action
is needed�
Attention
This symbol appears when
corrective action is required�
Allow the unit to
warm up� If this
alarm continues,
contact your home
care provider�
(Symbol
ashes)
1 short beep
Low Battery Alarm
The battery symbol ashes
when approximately 17
minutes of battery life remains
for the primary or secondary
battery� Remaining battery life
is dependent on your device
settings and your activity level�
Replace the
battery or connect
to a power source�
(Press bell symbol
to silence the
alarm�)