User manual

Provider Manual
32
To change the rise time setting, complete the following steps:
1. From the Monitoring screen, press the Right User key. The Rise Time
Setting screen appears, as shown in Figure 6–9.
Figure 6–9 Rise Time Setting Screen
2. Increase or decrease the rise time setting from 1 to 6 by pressing the
Heat or Ramp key until you find the right setting. A setting of 1 is
the fastest rise time, while 6 is the slowest.
NOTE: When the Harmony is in Bi-Flex mode, it will use a rise time
of 3 regardless of the chosen setting.
6.2.2.3 CHANGING THE RAMP STARTING PRESSURE
The Harmony is equipped with an optional ramp feature that your
home care provider can turn on or off. This feature will reduce the
pressure and then gradually increase (ramp) the pressure to the pre-
scription pressure setting so you can fall asleep more comfortably.
NOTE: The ramp feature is not prescribed for all users. If the screen
shown in Figure 6–10 does not appear on your display, you
cannot adjust this setting.
If your physician prescribed ramp for you, complete the following steps:
1. From the Monitoring screen, press the Right User key until the
Ramp Start Setting screen appears, as shown in Figure 6–10.