User manual

Provider Manual
31
6.2.2.1 CHANGING THE FLEX SETTING
The Flex setting allows you to adjust the level of air pressure relief that
you feel when you exhale during therapy.
NOTE: The Flex feature is not prescribed for all users. If the screen
shown in Figure 6–8 does not appear on your display, you
cannot adjust this setting.
To change the Flex setting, complete the following steps:
1. From the Monitoring screen, press the Right User key. The Flex
Setting screen appears, as shown in Figure 6–8.
Figure 6–8 Flex Setting Screen
2. To increase or decrease the Flex setting, press the Heat or Ramp key
until the correct setting appears. You can choose from 1 to 3.
NOTE: It is recommended that you start with the minimum setting of
1, which provides the least relief. Levels 2 and 3 progressively
increase the pressure relief.
6.2.2.2 CHANGING THE RISE TIME SETTING
Rise time is the time it takes for the Harmony to change from IPAP to
EPAP. You can adjust the rise time to find the setting that provides you
with the most comfort.
NOTE: The rise time feature is not prescribed for all users. If the
screen shown in Figure 6–9 does not display, you cannot
adjust this setting.